Hotchkis 2236F Sway Bars, Front, 70-81 GM F-Body, Sport - Manual (Page 3)

2236 GM F-Body Stabilizer Bar Installation Instructions Page 3 of 16
4F. Take the bolts out of the frame brackets and remove the stock sway bar from the vehicle.
5F.
Using the included white silicon grease, lube the inside of the new 1 3/8” front bushings.
NOTE: the grease can be cleaned up with WD-40
6F.
Install the bushing on the new Hotchkis bar. Make sure the split on the bushing faces the front
when the bar is installed in the vehicle. Look at the placement of the original stock bushings
on the stock bar for guidance.
7F.
Place the greasable bracket over top the bushing.