Hotchkis 20101 Chassis, Max Handle Bars, 67-69 Camaro & 68-74 Nova X-Body - Manual (Page 4)

1967-1969 Chevy Camaro
Hotchkis Performance LLC.
4
8. Install the cross member by using the hardware provided and bolting it to
each brace on the cross member bracket. The cross member can be
completely tightened.
NOTE: Be sure to use the washer provided on the cross member bolt.
9.
Now tighten the fender/firewall bracket end first and then tighten the A-arm
bracket. Your Handle Bar Brace system is now ready to go.
CROSS MEMBER
BRACKET
THIS END
FIRST A-ARM
BOLTS LAST