Hotchkis 1102 Tubular Upper Control Arms, 64-72 GM A-Body, Stock Spindle User Manual
Installation of hotchkis upper control arms
Advertising
Thank you for your purchase from our new line of GM parts.
Please call us at 877 - 4NO - ROLL if you have any questions
regarding the service or installation of your Hotchkis Performance products.
1
Raising
Vehicle
Jack up the front end of the vehicle and secure with jack stands. Remove both front wheels.
2
Loosen the Upper Ball Joint Nut
Locate and remove the cotter pin. Loosen the castle nut a couple of turns. DO NOT
REMOVE THE NUT AT THIS TIME.
Installation of Hotchkis Upper Control Arms
Tubular Upper Control Arms
64-72 GM A-Body P/N 1102
70-81 GM F-Body P/N 1106
Advertising
Table of contents
Document Outline
- Installation of Hotchkis Upper Control Arms
- Tubular Upper Control Arms
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 0TUwww.hotchkis.netU0T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?