Hotchkis 89005 TVS System, Extreme, 68-70, GM A-Body, Big Block - Manual (Page 30)

2282 1964-1972 GM A Body
Hotchkis Sport Suspension LLC.
5
3. Attach Sway Bar to the End Links
Orient the sway bar so that the Hotchkis sticker is right side up. At this time you can
choose the stiffness setting by using the hole at the end for a softer setting or the 2 nd
hole from the end for a harder setting. use the ½” x 3” bolt to attach the sway bar to
the end link. The bolt should be pointing inboard. Use the ½” SAE washer (small) on
the bolt head side and the ½” USS washer (larger) on the nut side. Do not fully tighten
at this time.
4. Install Axle Brackets
First step is to install the provided stainless steel U-bolts. Each U-bolt will install a little
inboard of the spring mount. You will have to unclip the brake line from the axle tab
and carefull pull the brake line away from the axle tube to give enough clearance for
the U-bolts.