Hotchkis 2216 1997-2004 Dakota Sport Sway Bars User Manual
Up dodge dakota
2216 (STOCK) / 2224 (3” LOWER) 2WD SPORT SWAY BAR SET
97-UP DODGE DAKOTA
Thank you for your purchase from our line of Dodge Dakota & Durango suspension parts.
Please call us at (877) 4NO-ROLL if you have any questions regarding the service and installation
of your Hotchkis Performance products. Visit us online @
This installation will require:
Hydraulic jack, jack stands, torque wrench
Rotary grinder or disk sander
The following wrenches or sockets: 15mm, 16mm, 17mm, 3/4"
INSTALLATION OF HOTCHKIS PERFORMANCE FRONT SWAY BAR
1)
Securely block the rear wheels of the vehicle. Use a jack to raise the front and support with jack
stands to the frame. You do not have to remove the front wheels for this installation.
2)
Use a 15mm socket or wrench to loosen and remove the nut holding the stock end link to the
sway bar. Retain the stock nut, washer, and bushing for re-installation later.
Document Outline
- UImproperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- UImproperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- UInstalled in any vehicle that has been modified;
- UInstalled on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- UInstalled on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- UDid you register the product at U0TUwww.hotchkis.netU0TU or via the mail-in warranty card within 30 days of purchase?
- UIs the product appropriate to your application?
- UDid you carefully and thoroughly read the instructions provided along with the product?
- UDo you have the original invoice or sales receipt?
- UIs the return date within 36 months from the purchase date?
- UAre you the original purchaser?
- UWas the product properly installed by a qualified, licensed auto mechanic?
- UHas the product been installed on the original vehicle on which it was installed at all times?
- UIs the product unmodified and clean?
- UIs the reason for return a legitimate product defect?