Hotchkis 1822 Rear Suspension Package, Adjustable, Dual Upper, 67-70 GM B Body - Manual (Page 12)

11) Reattach the brake line to the side of the Hotchkis arm using the tapped hole on the outside of
the trailing arm. Use the new hardware provided.
12) Check that all hardware is in place and tightened. Cover the zerk fittings using the plastic caps
provided. Use a jack to remove the jack stands, and you’re finished installing your new arms!
IMPORTANT! For proper maintenance, use the zerk fittings to grease the bushings at least once a
year (15,000 miles) or when excessive noise occurs. Use a non-lithium based grease only! A lithium-
based grease can wash out with water and should not be used.
SEE NEXT PAGE FOR PARTS LIST