Hotchkis 1501 1982-2002 GM F-Body Panhard Rod Black - Manual

1501 DOUBLE ADJUSTABLE PANHARD BAR
82-02 CHEVROLET/PONTIAC F-BODY
Thank you for your purchase.
Please call us at (562) 907-7757 if you have any questions regarding your Hotchkis Performance
products. Visit us online @ www.hotchkis.net
INSTALLATION OF HOTCHKIS PERFORMANCE
ADJUSTABLE PANHARD BAR
1) Jack up the rear of the vehicle and use jack stands to support the sub-frame.
2) Place the jack under the differential to raise or lower the axle as necessary. You will need to do
this so that the axle sits at ride height in the vehicle. USE CAUTION! Do not
take the vehicle
weight off the jack stands.
3) Remove the bolts at each end of the stock panhard bar and remove the bar. Retain and clean
the stock hardware for later use!
4) Place the stock panhard bar on a flat, level surface, next to the Hotchkis panhard bar. Match the
length between the bushing centers on the stock bar to the Hotchkis bar. If the lengths are
uneven, then loosen the jam nut on the Hotchkis bar and rotate the head of the bar to adjust.
Make sure you keep the exposed threads the same on both sides of the panhard bar.