Hotchkis 22419 Sway Bars, Set, Neon SRT-4, Sport User Manual
Installation of the front sway bar
Advertising
Neon SRT-
4
22419 FRONT AND REAR SPORT STABILIZER BAR SET
Thank you for your purchase from our Hotchkis Tuning line of suspension parts.
Please call us at (877) 4NO-ROLL if you have any questions regarding your Hotchkis
products. Visit us online @
Installation of the Front Sway Bar
1.)
Please look at the original front antiroll bar and note the orientation of the front
bar. You will want to install the new Hotchkis bar in the same manner.
2.)
Remove the end links using a 14mm socket and a pair of vice grips to hold the
top.
3.)
Now remove the sway bar mounts but keep the brackets near by because you will
use them again. The remove the bar.
Advertising
Table of contents
Document Outline
- UInstallation of the Front Sway Bar
- UImproperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- UImproperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- UInstalled in any vehicle that has been modified;
- UInstalled on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- UInstalled on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- UDid you register the product at U0TUwww.hotchkis.netU0TU or via the mail-in warranty card within 30 days of purchase?
- UIs the product appropriate to your application?
- UDid you carefully and thoroughly read the instructions provided along with the product?
- UDo you have the original invoice or sales receipt?
- UIs the return date within 36 months from the purchase date?
- UAre you the original purchaser?
- UWas the product properly installed by a qualified, licensed auto mechanic?
- UHas the product been installed on the original vehicle on which it was installed at all times?
- UIs the product unmodified and clean?
- UIs the reason for return a legitimate product defect?