See next page for parts list – Hotchkis 1313 Trailing Arms, Lower, 59-64 GM B-Body User Manual
Page 4
Advertising
11)
Check that all hardware is in place and tightened. Cover the zerk fittings using the plastic caps
provided. Remove the jack stands, and you’re finished.
IMPORTANT!
Check all hardware after the first five miles. For maintenance be sure to grease the
bushings using the zerk fittings at least once a year (15,000 miles) or whenever excessive noise
occurs. Use only a non-lithium based grease
. Lithium based grease can wash out with water.
SEE NEXT PAGE FOR PARTS LIST
Advertising