Hotchkis 20109 Chassis, Max Strut Tower Brace, 10-11 Camaro User Manual
Page 8
Advertising
2010 Chevy Camaro
Hotchkis Performance LLC.
8
11.
With the strut brace in place you can now mark the front holes with a marker. Mark
the center of the front bracket slot on each side. Remove the strut brace from the
vehicle.
12. Drill the front holes in the same manner as the rear holes. Start with a 1/16” or 1/8”
pilot hole and finish it off with a 3/8” hole. These holes can be drilled from the engine
bay side.
Advertising