Installation of hotchkis rear sway bar – Hotchkis 2207RC Sway Bars, Rear, 67-69 Camaro-Firebird GM F-Body, Sport User Manual

Page 2

Advertising
background image

1967-1969 GM F Body


Hotchkis Performance LLC.

2

1R.

Remove the lower rear seat cushion. If the cushion won’t pull up easily, use a long

screwdriver to push and release the small bar that is clipped in the bracket. Remove the two

bolts that hold the back part of the seat to the body and lift the upper cushion to remove it
from the vehicle. This will allow you to access the floor pans.

1

2

2R. Jack up the vehicle and properly support with jack stands or lift jacks. Make sure the

rear end is supported with the vehicle’s load on the leaf springs. This is to ensure you

install the rear bar in the proper position.

3R.

Take the 7/8” bushings and grease the inner surface with the included white silicon
grease.

Installation of Hotchkis Rear Sway Bar

Advertising