Hotchkis 22423 EVO 8-9 Rear Sport Sway Bar - Manual (Page 3)

4.
Use a ratchet and a socket to loosen and remove the rear end links from the sway bar.
Retain the hardware for later re-installation.
5.
Use a socket or wrench to loosen and remove the bolts holding the stock sway bar in
place. The stock sway bar, bushings and brackets can all be removed now. The swaybar
bracket is a two piece bracket. The stock inner piece will be used again.
6.
Notice the bracket setup. This is how it will look in your car