Hotchkis 17366 Sway Bars, Rear, Slim Fit End Link Bolt User Manual
Hotchkis For the car
Thank you for your purchase from our new line of Mopar parts.
Please call us at 877 - 4NO - ROLL if you have any questions
regarding the service or installation of your Hotchkis Performance products.
IMPORTANT: PLEASE READ THE ENTIRE
STARTING THIS INSTALLATION.
INSTRUCTION MANUAL BEFORE
Installation
1.
Remove the current Hotchkis dog bone end link from the car.
2.
Press the inner sleeve out of one of the dog bone ends. (It doesn’t matter which end)
3.
Retain the 2 polyurethane bushings and re-grease the inside surface with the supplied silicon lube.
4.
Press in the new studded sleeve into the bushings.
5.
Reinstall the dog bone back onto the car. Make sure to attach the studded end onto the sway bar first. The stud
should point inward towards the middle of the car. Use the provided washer and nut to secure the stud onto the
sway bar. Reuse the nuts & bolts for the frame mount end.
Studded Dog Bone Conv. Kit 17366
70-74 Mopar E-Bodies
Document Outline
- Studded Dog Bone Conv. Kit 17366
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 0TUwww.hotchkis.netU0T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?