Hotchkis 1801 1982-2002 GM F-Body Rear Suspension Pckg. - Manual (Page 7)

With all adjustments to the bar complete loosely tighten the jam nuts by hand to keep the heads
from spinning when installing the bar.
5) Use the grease provided in the kit to apply a thick coat of grease to the sides of the panhard
rod bushings to prevent squeaking after installing.
6) Install the Hotchkis panhard rod back into the mounting points the stock bar used. Make
certain that the grease fittings on the bar point towards the ground (if the head isn’t facing the
opposite direction of the non-adjustable end), as this will make it easier to grease the bar after
installation. Install the fixed end of the bar first. Re-use the stock hardware to attach the bar, and
loosely tighten it by hand.