Hotchkis 2266 2002-2004 Ram 1500 2wd Sport Sway Bars, For Lowered Trucks - Manual (Page 2)

3. Out of the hardware pack T1712 grab the two shorter bolts (2'3/4") out of the four
and place them through the end links using the big washer.
4. Then grab the nut clip and put it through the existing frame hole and tighten the
bolt.
5.
Now grab the rear sway bar bushings and grease the inner hole with the provided
grease.
6. Place the bushings on the sway bar followed by the bracket.
7.
Attach the sway bar to the end links and finger tight the bolts and let it hang. Start
with the end link on the out side hole and if you want the rear end stiffer change it
to the inside hole
8. Now remove the bottom shock bolt and pull the shock out of the axle brackets.