Hotchkis 80035 TVS System, 67-69, Camaro-Firebird GM F-Body, Small Block, 3" Drop User Manual

Page 17

Advertising
background image

1967-1969 GM F Body


Hotchkis Performance LLC.

17

13R. Using the 1718 Hardware kit, pull out the U-Bolts and coat the threading with the Anti-

Seize Lubricant.

Feed one end of the U-Bolt through one of the holes on either end of the chassis brace

and maneuver it into the backside of the other hole as shown below.

Place washers and nylock nuts on the U-Bolt. Tighten one side of the U-Bolt partially,

and then tighten the other side of the U-Bolt partially alternating back and forth until

fully tightened to guarantee the bolt is tightened properly.

Advertising