Hotchkis 80114 1973-1976 Dodge A-Body TVS System - Manual (Page 27)

5F Install the Bushings & Brackets
Lube the inside surface of the new bushings with the provided grease. Install the bushings on to
the bar. Install the bushing bracket onto the bushing. Due tolerances in subframes, you may need
to install the large (1/2”) & small (1/8”) spacers between the bushing and the subframe bushing
mounts. Please check the clearance the bar has inside the k-member. If it needs to move up or
down, add or remove the 1/8” spacer to achieve proper clearance.
11F. Install End Links
Install the new end links in the same fashion as the stock removal.