MSD 7562 Programmable Launch Boost Controller Installation - Manual (Page 15)

INSTALLATION INSTRUCTIONS 15
MSD IGNITION • 1490 HENRY BRENNAN DR., EL PASO, TEXAS 79936 • (915) 857-5200 • FAX (915) 857-3344
Figure 10
TEST EXAMPLE 5 - FIGURE 10
The MAP data trace curve can be dragged from the History Trace window into the Boost Trace
window and dropped on the RefTrace to allow analyzing or comparing the actual target pressure
curve to the measured boost value in PSIA units. Figure 10 shows the test plot of one of the near
optimum tuned PID test runs comparing the target curve to the actual test pressure.