Ohaus MB45 MOISTURE ANALYZER Manual - Manual (Page 30)

28 MB45
5.9 Adjusting Display Contrast and Brightness
This menu permits adjusting the contrast and brightness levels on the display screen. To change the
levels, proceed as follows:
LANGUAGE
BEEPER
TIME-DATE
RS-232
PRINT
DISPLAY
ANALYZER SETUP Press the Setup button. Using the down arrow button, scroll to DISPLAY.
Press the Enter button.
Adjusting contrast
Using the up/down arrow buttons, adjust the screen contrast to the
desired level. The numeric value (0 to 100) is for reference only. Press
the right arrow button to advance to BRIGHT. Default = 40.
60
10
CONTRA
ST:
BRIGHT:
EXIT WITHOUT SAVING
DISPLAY ADJUST
Adjusting brightness
Using the up/down arrow buttons, adjust the screen brightness to the
desired level. The numeric value (0 to 10) is for reference only. Press the
Enter button. Default = 10.
Exit without saving
If you do not wish to save settings, Use the right arrow button and scroll
to EXIT WITHOUT SAVING and press the Enter button. The display returns
to ANALYZER SETUP.