Ohaus MB45 MOISTURE ANALYZER Manual - Manual (Page 31)

MB45 29
5.10 Factory reset
BEEPER
TIME-DATE
RS-232
PRINT
DISPLAY
FACT.RESET
ANALYZER SETUP
Factory reset
Press the Setup button. Using the down arrow button, scroll to FACT.
RESET and press Enter.
Using the up/down arrow buttons, select NO or YES. If you select YES, the
prompt asks: (ARE YOU SURE) (NO) (YES). Press the Enter button.
Factory reset settings
The following table indicates the menus and options which are factory
default settings when Factory Reset is set to YES.
FACTORY RESET TABLE
Menu Items Default Value
Analyzer Setup Menu
Lock
Out OFF
Custom Unit 1.000,0,1
Language Setting English
Beeper Low
Time-Date MM/DD/YY
RS232 Setting 9600, N, 8, 1, None
Print Settings Print OFF, GLP OFF
Display 60, 10
Factory Reset NO