Ohaus MB45 MOISTURE ANALYZER Manual - Manual (Page 40)

38 MB45
6.8 Custom units (cont)
TEST SETUP
TEST ID:
PROFILE:
DRY TEMP:
SWITCH OFF:
RESULT:
CUSTOM:
CUSTOM
1.00000
Custom unit
With CUSTOM highlighted, press the Enter button.
CUSTOM UNIT
FACTOR +
EXPONENT
LSD
1.00000
0
1
EXIT WITHOUT SAVING
Factor
Using the arrow buttons, enter the factor number. This can be a
number between 0.1 and 1.999999. For conversion factors outside of
this range, the exponent will be used to move the decimal point. Press
the right arrow button to advance to EXPONENT.
CUSTOM UNIT
FACTOR
EXPONENT
LSD 1.00000
0
1
EXIT WITHOUT SAVING
Exponent
Using the up/down arrow buttons, select an exponent either +3, +2,
+1, 0, -1, -2, or -3. Press the right arrow button to advance to LSD.
CUSTOM UNIT
FACTOR
EXPONENT
LSD 1.00000
0
1
EXIT WITHOUT SAVING
LSD
Using the up/down arrow buttons, select the least significant digit
(LSD) of 1, 2, 5, 10 or 100 and press the Enter button. The display
returns to the TEST SETUP screen.