Ohaus MB45 MOISTURE ANALYZER Manual - Manual (Page 33)

MB45 31
6.3 Setting the drying profile
The drying profile contains four settings, Standard, Fast, Ramp and Step. Section 6, paragraph 6.4
describes each of the drying profiles. Review the profile descriptions. Depending upon the sample
material to be analyzed, select the appropriate profile and proceed as follows:
TEST PARAMETERS
TEST ID:
PROFILE:
DRY TEMP:
SWITCH OFF:
RESULT:
CUSTOM:
-DEFAULT-
STANDARD
180C
AUTO 60
MOISTURE%
OFF
Standard Profile
Using the arrow buttons, scroll to PROFILE and press the Enter button.
Using the arrow buttons, scroll to STANDARD and press Enter button.
TEST PARAMETERS
TEST ID:
PROFILE:
DRY TEMP:
SWITCH OFF:
RESULT:
CUSTOM:
-DEFAULT-
STANDARD
180C
AUTO 60
MOISTURE%
OFF
Fast Profile
Using the arrow buttons, scroll to PROFILE and press the Enter button.
DRYING PROFILE
FAST
EXIT WITHOUT SAVING
Using the arrow buttons, scroll to FAST and press the Enter button.