Ohaus RANGER 3000 COMPACT SCALES Manual - Manual (Page 14)

EN-12 Ra
nger™ 3000
Series
4. MENU SETTINGS
The User Menu allows the customizing of scale settings.
Note: Additional Sub-Menus may be available if Interface Options are installed. See Interface
User Manual for the additional setting information.
4.1 Menu Navigation
User Menu:
Menu: C.A.L S.E.t.U.P
r.E.A.d M.O.d.E
Menu
Items:
Span
Lin
GEO
End
Reset
Pwr.Un
Zero
A.Tare
Bp.Sig
Bp.Key
Accum
End
Reset
Stable
Filter
AZT
Light
A.Off
End
Reset
Weigh
Percnt
Count
Check
Dynam
End
U.n.i.t P.r.i.n.t.1 C.O.M.1 L.O.C.k E.n.d
Menu
Items:
Reset
kg
g
lb
oz
lb:oz
End
Reset
Stable
A.Print
Contnt
Layout
Data.Tr
End
Reset
Baud
Parity
Stop
Handsh
Alt.Cm
End
L.Cal
L.Setup
L.Read
L.Mode
L.Unit
L.Print
L.COM
End
Notes:
Some modes/units may not be available in all models.
When LEGAL FOR TRADE is set to ON (Lock Switch in locked
position), the menu settings are affected as follows:
Calibration (C.A.L) menu is not accessible.
Zero Range setting is locked at 2%.
Stable Range setting is locked at 1d.
Auto-Zero Tracking setting is locked at 0.5d.
Filter and Units are locked at their current settings.
Stable Only is locked On.
Auto Print/ Continuous is disabled.
Lb:oz is locked Off.
Summary of button navigation functions in menu mode:
-- Yes Allows entry into the displayed menu.
- Accepts the displayed setting and advances to the next item.
-- No Skips by the displayed menu.
- Rejects the displayed setting or menu item and advances to the next
available item.
-- Back Moves backwards through the upper and middle level menus.
- Backs out of a list of selectable items to the previous middle level menu.
-- Exit Exits from menu directly to the active weighing mode.