Series – Ohaus RANGER 3000 COMPACT SCALES Manual User Manual
Page 20
![background image](/manuals/257207/20/background.png)
EN-18
Ranger™ 3000
Series
Note: Available units vary by model and local regulations.
4.7 Print1 Menu
Enter this menu to set printing parameters. Default settings are bold.
Note:
The Print2 menu is only displayed if a second interface is installed.
Reset
[reset]
Reset the Print menu to factory defaults.
NO
= no reset
YES
= reset
Stable Only
[Stable]
Set the printing criteria.
OFF
= values are printed immediately
ON
= values are only printed when the stability criteria are met
Reset:
no
, yes
Stable Only:
off
, on
Auto Print:
off
on stable
interval
continuous
accept
Content:
Result (-> off, on)
Gross (-> off, on)
Net (-> off, on)
Tare (-> off, on)
Header (-> off, on)
Footer (-> off, on)
Mode (-> off, on)
Unit (-> off, on)
Info (-> off, on)
Accu (-> off, result, all)
Layout:
Format (->S,M)
Feed (->Line, 4 Lines, form)
Data Transfer: off, on
End Print:
Exit menu