Ohaus RANGER 3000 COMPACT SCALES Manual - Manual (Page 21)

Ranger™ 3000
Series EN-19
Auto Print
[A.Print]
Set the automatic printing functionality.
OFF = disabled
ON.STAB = printing occurs each time the stability criteria are met 1
INTER = printing occurs at the defined interval 2
CONT = printing occurs continuously
ACCEPT = printing occurs each time the display is within the Checkweigh accept
range and stability criteria are met.
1 When ON.STAB is selected, set the condition for printing, where:
LOAD = printing occurs when the load is stable and greater than zero
LOAD.ZR = printing occurs when any load is stable and equal to or greater
than zero.
2 When INTER is selected, set the Print Interval.
1 to 3600 (seconds)
Content
[CONtNt]
Define the content of the printed data. See section 7.4 for sample printouts.
Result
Set the status.
OFF = disabled
ON = the displayed reading is printed
Gross
Set the status.
OFF = disabled
ON = the gross weight is printed
Net
Set the status.
OFF = disabled
ON = the net weight is printed
Tare
Set the status.
OFF = disabled
ON = the Tare weight is printed
Header
Set the status.
OFF = disabled
ON = the Header is printed
Note:
See section 7.3.1 for how to enter Header line
Footer
Set the status.
OFF = disabled
ON = the Footer is printed
Note:
See section 7.3.1 for how to enter Footer line