QNAP Security VioStor CMS (Version: 1.0.1) - Manual (Page 116)

116
Note:
 Enabling or disabling manual recording will not affect scheduled or alarm recording.
They are independent processes.
 By default, the snapshots are saved in “My Documents” or “Documents”> “Snapshots”
(in Windows.)
 If the snapshot time is inconsistent with the actual time that the snapshot is taken, it is
caused by the network environment and not a system error.
 The event alarm settings can only be configured on the NVR. Users can only enable or
disable the CMS to receive alarms.
 When the digital zoom function is enabled on multiple IP cameras, the zooming
performance will be affected if the computer performance decreases.
When right clicking a camera channel on the live view page, the following functions may not
be available depending on the IP camera model:
 Connect to camera homepage.
 Camera Settings: Open the configuration page of the IP camera (Please refer to the
camera settings in the NVR user manual for details.)
 Preset Positions: Select the preset positions of a PTZ camera.
 Auto Cruising: Configure the PTZ cameras to cruise according to the preset positions
and the staying time set for each preset position.
 PTZ Control: Pan, tilt, or zoom camera control.
 Digital Zoom: Enable or disable digital zoom.
 Keep Aspect Ratio.
 Adjust Live Stream: Auto/Quality priority/Performance priority/Recording stream.
 Carousel: Manually switch to the next or last camera in the sequential mode.