QNAP Security VioStor CMS (Version: 1.0.1) - Manual (Page 159)

159
Network Speed
Select the network transfer rate according to the network environment to which the CMS
Server is connected. Select auto negotiation and the system will adjust the transfer rate
automatically.
Obtain the IP address settings automatically via DHCP
If the network supports DHCP, select this option and the CMS Server will obtain the IP
address and network settings automatically.
Use static IP address
To use a static IP address for network connection, enter the IP address, subnet mask, and
default gateway.
Enable DHCP Server
A DHCP (Dynamic Host Configuration Protocol) server assigns IP addresses to the clients on
a network. Select “Enable DHCP Server” to set the CMS Server a DHCP server if there is
none on the local network where the CMS Server locates.