QNAP Security VioStor CMS (Version: 1.0.1) - Manual (Page 62)

62
 Standalone: Assign different IP settings for each network port. The NVR can be
accessed by different workgroups on two subnets. When load balancing is enabled,
failover will not work. The DHCP server can only be enabled for the primary network
port (LAN 1).
 Use static IP address: To assign a fixed IP to the NVR, enter the IP address, the subnet
mask, and the default gateway.
 Primary DNS Server: Enter the IP address of the primary DNS server that provides the
DNS service for the NVR on the external network.
 Secondary DNS Server: Enter the IP address of the secondary DNS server that
provides the DNS service for the NVR on the external network.