QNAP Security VioStor CMS (Version: 1.0.1) User Manual
Page 190
190
9. The changes to the system configuration did not take effect.
Solution
After changing the settings on the configuration page, click “Apply” to save the changes;
otherwise the settings will not be saved and will not take effect.
10. The CMS Client does not show the alarm information.
Solution
You have to configure the alarm settings in the NVR, and check the event management
page in the CMS Client. After that, you can find the alarms in the Live View user interface.
11. After power outage and improper server shutdown, the server does not function
properly after the restart. What should I do?
Solution
Please try the following:
a) If the system configuration were lost, configure the system again.
b) If the problem persists, contact the technical support.