QNAP Security VioStor CMS (Version: 1.0.1) - Manual (Page 117)

117
3.15.1 Live View Page
After correctly setting the channel layout, the live videos of the IP camera will be shown on
the live view page. Click the monitoring page to use the features supported. Please note
that the PTZ camera control panel at bottom left side of the screen can only be used after
a channel is selected from the monitoring page (The frame of the channel will turn into the
orange color, and the channel selected will become an active channel.)
Camera Status
The camera status is indicated by the icons shown below:
Icon Camera Status
Indicates that the camera is in the scheduled or continuous recording
mode.
Indicates that manual recording mode is enabled for the camera.
Indicates that the camera is currently being triggered to record by the
advanced NVR Event Management (“Camera Settings” > “Alarm Settings”
> “Advanced Mode”).
Indicates that this IP camera supports the audio function.
Indicates that this IP camera supports PTZ control.
Indicates that digital zoom is enabled.