QNAP Security VioStor CMS (Version: 1.0.1) User Manual
Page 168
168
Note: If the system is running properly, there is no need to update the firmware.
Before updating the system firmware,
make sure the product model and firmware version
are correct. Follow the steps below to update firmware:
1. Download the release notes of the firmware from the QNAP Security website
Read the release notes carefully to make sure it is
required to update the firmware.
2. Download the CMS Server firmware and unzip the IMG file to the computer.
3. Before updating the system firmware, back up all the disk data on the CMS Server to
avoid any potential data loss during the system update.
4. Click “Choose File” to select the correct firmware image for the system update. Click
“UPDATE SYSTEM” to update the firmware.
The system update may take up to several minutes to complete depending on the network
connection status. Please wait patiently. The CMS Server will inform you when the system
update has completed.