QNAP Security VioStor NVR (Version: 3.5.1) - Manual (Page 199)

199
Actions:
The NVR supports different actions which can be activated when the selected events are
triggered on the IP cameras or the video servers. The actions include video recording,
email alert, SMS alert, buzzer, PTZ camera control, alarm output, and logic output.
Button Description
Add an action:
After configuring an event on the left, click ‘Add’ to create an action in
response to the event. Click ‘Apply’ to save the settings.
Edit an action:
Select an event on the left. All the actions defined for this event will be
shown. Select the box in front of the action name to edit. Then click this
button on the ‘Action’ column to edit the action settings.
Delete an action:
Select an event on the left. All the actions defined for this event will be
shown. Select the box in front of the action name to delete and click
‘Delete’. Multiple actions can be deleted.
Note: Make sure the action in the event settings has been enabled; otherwise the action
will not be executed.