QNAP Security VioStor NVR (Version: 3.5.1) - Manual (Page 63)

63
Chapter 4. Use the NVR by Web-based Interface
Use Microsoft Internet Explorer to monitor the IP cameras and manage the functions of the
NVR.
Important Notice:
Before using the NVR, install the hard disks in the server correctly and finish the disk
formatting and configuration. Otherwise, the server will not function properly.
4.1 Connect to the NVR
Follow the steps below to connect to the monitoring page of the NVR.
1. Run the Finder. Double click the name of the NVR, or enter the IP address of the
server in the IE browser to connect to the monitoring page.
Double click to
login the server