QNAP Security VioStor NVR (Version: 3.5.1) - Manual (Page 37)

37
Chapter 3. Use the NVR by Local Display
Note: This feature is supported by the VioStor Pro Series NVR only. The models include
VS-8148U-RP Pro, VS-8140U-RP Pro, VS-8132U-RP Pro, VS-8124U-RP Pro, VS-8148 Pro+,
VS-8140 Pro+, VS-8132 Pro+, VS-8124 Pro+, VS-8040U-RP, VS-8032U-RP,
VS-8024U-RP, VS-8040, VS-8032, VS-8024, VS-6020 Pro, VS-6016 Pro, VS-6012 Pro,
VS-4016U-RP Pro, VS-4012U-RP Pro, VS-4008U-RP Pro, VS-4016 Pro, VS-4012 Pro,
VS-4008 Pro, VS-2012 Pro, VS-2008 Pro, and VS-2004 Pro.
Connect a monitor or TV to the NVR via the HDMI or VGA interface to perform PC-less quick
configuration, monitoring, and video playback. To use this feature, follow the steps
below:
1. Make sure at least one hard drive has been installed on the NVR.
2. Connect the NVR to the network.
3. Make sure the IP cameras have been configured and connected to the network.
4. Connect an HDMI or a VGA monitor or TV (suggested video output resolution: 1920 x
1080)* to the HDMI or VGA interface of the NVR.
5. Connect a USB mouse and a USB keyboard (optional) to the USB ports of the NVR.
6. Turn on the NVR.
*The local display feature supports maximum screen resolution of 2048*1536 (QXGA).