QNAP Security VioStor NVR (Version: 3.5.1) - Manual (Page 231)

231
Chapter 8. LCD Panel
* This section is applicable to the NVR models with an LCD panel only.
The NVR provides a handy LCD panel for users to perform the disk configuration and view
the system information.
When the NVR has started up, the server name and the IP address will be shown:
N V R 5 F 4 D E 3
1 6 9 . 2 5 4 . 1 0 0 . 1 0 0
For the first time installation, the LCD panel shows the number of the hard disk drives
detected and the IP address. Configure the hard drives accordingly.
Number of hard
drives detected
Default disk
configuration
Available disk configuration options*
1 Single Single
2 RAID 1 Single -> JBOD ->RAID 0 -> RAID 1
3 RAID 5 Single -> JBOD -> RAID 0 -> RAID 5
4 or above RAID 5
Single ->JBOD -> RAID 0 -> RAID 5
-> RAID 6
*Press the ‘Select’ button to choose the option, and press the ‘Enter’ button to confirm.