QNAP Security VioStor NVR (Version: 3.5.1) - Manual (Page 236)

236
System Messages
When the NVR encounters system error, an error message will be shown on the LCD panel.
Press the ‘Enter’ button to view the message. Press the ‘Enter’ button again to view the
next message.
S y s t e m E r r o r !
P l s . C h e c k L o g s
System Message Description
Sys. Fan Failed The system fan fails
Sys. Overheat The system overheats
HDD Overheat The hard drive overheats
CPU Overheat The CPU overheats
Network Lost Both LAN 1 and LAN 2 are disconnected in failover
or load-balancing mode
LAN1 Lost LAN 1 is disconnected
LAN2 Lost LAN 2 is disconnected
HDD Failure The hard drive fails
Vol1 Full The volume is full
HDD Ejected The hard drive is ejected
Vol1 Degraded The volume is in degraded mode
Vol1 Unmounted The volume is unmounted
Vol1 Nonactivate The volume is not activated