QNAP Security VioStor NVR (Version: 3.5.1) - Manual (Page 210)

210
6.7 System Tools
The System Tools help optimize the system maintenance and management. Set the alert
notification, restart or shut down the server, configure the hardware settings, update the
system firmware, back up/restore/reset the system settings, set the E-map, and run the
ping test.
6.7.1 Alert Notification
Enter the email address of the administrator and the IP address of the SMTP server. When
an error occurs, e.g. power outage or a hard disk drive is unplugged, an alert email will be
sent to the specified recipients automatically. To view the details of all the errors and
warnings, go to ‘Logs & Statistics’ > ‘System Event Logs’.
Note: It is recommended to send a test email to make sure the mail server settings are
correct.