QNAP Security VioStor NVR (Version: 3.5.1) - Manual (Page 214)

214
6.7.4 Hardware Settings
Enable or disable the hardware functions of the NVR.
Enable the configuration reset switch
By enabling this option, press the reset button for 5 seconds to reset the administrator
password and system settings to default.
Note: The configuration reset switch is enabled by default. When this option is disabled,
keep the password safely. Otherwise, the NVR cannot be reset anymore if the password is
lost.
Auto power on when power resumes after power loss
When this function is enabled, the server will turn on automatically when the power
resumes after a power loss.