Shogun Motorsports Honda CBR600RR (07-12) Frame Slider - Manual (Page 2)

mind Metric 10 or 12mm X 1.25 pitch bolts (most common sportbike engine studs) are fairly
hard to find. Make sure you know the size and that the bolt you’re buying is a 1.25 pitch bolt.
With the body removed, thread in by hand your spot tool. Make sure you have the spot tool
screwed in enough to clear the body on the inside.
3.
Loosely mount your bodywork and adjust the spot tool out to lightly touch the inside of the
body. Make sure you have at least 15mm of thread engagement, without that the spot tool will
tend to sag down giving you a false location. With the body mounted in the correct locationand
softly tap or press with palm to leave a spot mark on the inside of the body. Be careful not to
scratch or chip the body.