Velleman VMB4PD - Manual (Page 18)

VMB4PD 18
Setting the Reaction Time
All commands have a short reaction time (65ms) by default. This reaction time can be set at 1, 2 or 3
seconds.
1. Hold the configuration button pressed for 4 seconds to display the configuration menu.
2. Press the configuration button again to display the next configuration menu.
3. Press the lower left push button to display the reaction time menu.
4. Press the lower buttons to set a reaction time of 0, 1, 2 or 3 seconds for the displayed command.
Press the configuration button to display the next configuration menu.
Configuration button
Next configuration menu
Setting reaction
time
Quit configuration menu
Label command 1 Label command 2
Modify reaction time command 1 Modify reaction time command 2
Next reaction time menu