Velleman VMB4PD - Manual (Page 7)

VMB4PD 7
Configuration
When using the module in the Velbus
®
system for the first time, configure:
• contrast
• backlight
• push button backlight
• clock
• address
• labels
• reaction time
• mode
• timer
Call the configuration menu by holding the configuration pressed for 4 seconds.
The configuration menu will be displayed.
Press the upper left push button to activate the clock menu.
Press the upper right push button to activate the display menu.
Press the configuration button to display the next configuration menu.
Press the upper left push button to activate the mode menu.
Press the upper right push button to activate the address menu.
Press the lower left push button to activate the reaction time menu.
Press the lower right push button to activate the label editor.
Press the configuration push button to quit the configuration menu.
Configuration button
Clock menu Display menu
Next configuration menu
Mode menu Address menu
Reaction time
menu Label
editor
Quit configuration menu