Velleman VMB4PD - Manual (Page 21)

VMB4PD 21
Programming the Timer
Programming can only be done if the timer function was selected in the user mode.
The commands can be automated via the timer function. It is like you would activate a command at a
particular time of the day. Twenty program steps can be programmed; each step has a programmable time
(day, hour and minutes) and command.
1. Hold the configuration button pressed for 4 seconds to display the configuration menu.
2. Press the lower left button to display the program menu.
3. The display shows the first program step (program number, time and a view of the automated
commands).
Remark:
The program indications for commands 1 to 4 disappear when the timer function has been
activated only for the second set of commands (Timer mode: 4CH).
Configuration button
Program menu
Program time
Program indication command 6
Program indication command 2
Program indication command 1
Program indication command 5
Day
Program number
Program indication command 4
Program indication command 8
Program indication command 7
Program indication command 3