Velleman VMB4PD - Manual (Page 28)

VMB4PD 28
4. Hold the configuration button pressed for 4 seconds to display the configuration menu.
5. Press the lower right button to enter the timer activation menu.
The timer activation menu is possibly not available which means there is no command used in
the program. In this case, press the configuration button again to exit the menu.
Go to section 10 the timer function is activated for the second set of commands only (Timer
mode: 4CH).
Go to section 8 if commands 1 and 2 are not used in the program.
Go to section 10 if commands 1 through 4 are not used in the program.
Go to section 12 if commands 1 through 6 are not used in the program.
6. Press the lower buttons to activate or deactivate for the displayed commands.
The timer indication means:
“ ”: the command will not be used in the timer program and cannot be modified.
“-”: the timer program for a particular command will not be executed.
“
”: the timer program for a particular command is activated.
Configuration button
Timer activation menu
Label command 1 Label command 2
Activate/deactivate timer
program command 1 Activate/deactivate timer
program command 2
Next timer activation menu