Velleman VMB1RY User Manual
Page 10
Velbus manual VMB1RY– edition 1 – rev.1.0
10
7
2-way timer (time 2 = 5min)
A short press will switch on the relay during the set time (see ‘TIME1’
rotary switch) .
A long press will switch on the relay for 5 minutes.
Operating the push button when the relay is on will immediately switch
off the relay.
8 2-way
timer (time 2 = 10min)
A short press will switch on the relay during the set time (see ‘TIME1’
rotary switch) .
A long press will switch on the relay for 10 minutes.
Operating the push button when the relay is on will immediately switch
off the relay.
9 2-way
timer (time 2 = 15min)
A short press will switch on the relay during the set time (see ‘TIME1’
rotary switch) .
A long press will switch on the relay for 15 minutes.
Operating the push button when the relay is on will immediately switch
off the relay.
A 2-way
timer (time 2 = 30min)
A short press will switch on the relay during the set time (see ‘TIME1’
rotary switch) .
A long press will switch on the relay for 30 minutes.
Operating the push button when the relay is on will immediately switch
off the delay.
B 2-way
timer (time 2 = 1h)
A short press will switch on the relay during the set time (see ‘TIME1’
rotary switch) .
A long press will switch on the relay for 1 hour.
Operating the push button when the relay is on will immediately switch
off the delay.
C 2-way
timer (time 2 = 2h)
A short press will switch on the relay during the set time (see ‘TIME1’
rotary switch) .
A long press will switch on the relay for 2 hours.
Operating the push button when the relay is on will immediately switch
off the delay.
D 2-way
timer (time 2 = 5h)
A short press will switch on the relay during the set time (see ‘TIME1’
rotary switch) .
A long press will switch on the relay for 5 hours.
Operating the push button when the relay is on will immediately switch
off the delay.
E 2-way
timer (time 2 = 1day)
A short press will switch on the relay during the set time (see ‘TIME1’
rotary switch) .
A long press will switch on the relay for 24 hours.
Operating the push button when the relay is on will immediately switch
off the delay.
F 2-way
timer (time 2 = on/off)
A short press will switch on the relay during the set time (see ‘TIME1’
rotary switch) .
A long press will switch off the relay for an undetermined time.
Operating the push button when the relay is on will immediately switch
off the relay.
Remarks:
The set mode is only applicable on push buttons connected to the direct push button input and to push buttons
connected via the Velbus
®
which were attributed the mode function in the learning mode (see learning mode).
If the TIME rotary switch is set on 0, the relay module will always operate in moment control, regardless of the
position of the MODE rotary switch.
If the TIME rotary switch is set on F, the relay module will operate in on/off mode.