Badger Meter 340 BN/MB Btu Energy Transmitter - Manual (Page 16)

NOTE: N If communication still does not occur and you are using a DB9 to COM 1 or COM2, try using a USB to COM adapter
This will usually create a new COM port that was not previously listed Windows Device Manager can be helpful in
determining the actual COM ports that are available
Figure 19: Device Manager
Select this new port created by the adapter and the screen should change as shown (Figure 20) Notice that the “---“
are replaced with values This confirms normal communications
Figure 20: Screen Change
Data Industrial® 340 BN/MB BTU Energy Transmitter
Page 16 July 2012