Velleman CAMIP13 Quick Installation Guide - Manual (Page 13)

9
3.2.7 UPnP
“UPnP” stands for “Universal Plug and Play”, which allows devices to connect seamlessly in the home and
corporate environments and simplify installation of computer components.
Check “Enable” to allow the network camera to be detected among devices within the same network area, and
set the identification name of the camera in “Friendly name”.
When this function is activated, the other PC within the same domain as this camera will be able to search this
camera in “Network Neighbor” with the identification name set in “Friendly name”. Double-click it to quickly open
the web browser for camera access.
Port Mapping
This function can eliminate the need to additionally access the router for port forwarding.
For details, please refer to “Advanced Network Setup” from www.surveillance-download.com/user/n807a.swf .
Note: Before using this function, make sure your router supports UPnP, and this function is enabled. If
not, please access your router additionally for port forwarding.
When “Port Mapping” is set to “Enable”, the system will automatically assign an IP address or port number for
you if no IP address or port number is entered.
Note: When the configurations are saved successfully, you’ll see a message indicating the IP address
and port number assigned to this network camera.
3.3 Camera
3.3.1 Camera
Adjust the camera parameters if necessary.
Item Description
Title Enter the title for the camera with up to 15 alphabetic characters.
Snapshot Path Specify the location to save the snapshot pictures.
Environment Select the current environment for the camera to automatically adjust itself to produce the images suitable for the
selected environment.