Velleman CAMIP13 Quick Installation Guide - Manual (Page 19)

15
3.6.2 Push Video
“Push Video” is an active notification system, different from traditional FTP and Email notification methods.
Note: For Push Video to work properly, make sure the record function is on in “Record” “Record”, and
the record timer for the external alarm is on in “Record” “Record Timer”.
Item Description
Guard Select to enable or disable Push Video. This function can also be enabled from your iPhone or Android mobile devices.
When this function is enabled, the image resolution is fixed to “VGA”.
Slow Shutter Lock Select to fix the slow shutter level to level 2 (Enable) or remain the current slow shutter level (Disable) when Push Video
is enabled.
When this function is enabled, it could ensure Push Video recording to get clear images when the environment is dark.
This function is set to “Enable” by default.
Guard Rule Select the rule to enable Push Video from “External Alarm”.
Record Frame Rate Select the frame rate for Push Video recording.
SMS Text Define the context when you receive the Push Video message on your iPhone or Android mobile device. Up to 28
characters are allowed.
3.7 General
3.7.1 General
In “General”, you can select the UI language, and check the MAC address of your camera.
To lock camera access when it’s not used after the specified time, select “5 MIN”, “15 MIN” or “30 MIN” from the
drop-down list of “Auto Lock Time”, or select “NEVER” to disable this function.
Note: When the camera access is locked after the specified time, to resume camera access, please
enter the password.