Velleman CAMIP13 Quick Installation Guide - Manual (Page 17)

13
3.4.2 Record Timer
To schedule alarm recording, click “External Alarm” to enable the recording, and select the time for recording.
Note: The timer must be enabled for the record function to work properly.
3.5 Storage
3.5.1 Memory
In “Memory”, you can check the remaining capacity for recording, or clear all recorded data saved if needed.
Note: The recorded data will be removed also when you reset or reboot this camera.
3.6 Trigger
3.6.1 Trigger
You can configure how this camera reacts when there’s an alarm or motion event.