Velleman CAMIP13 Quick Installation Guide - Manual (Page 22)

18
How to modify or delete an existing account
Step1: Select the account you want to modify or delete.
Step2: To modify the account, click “Edit” to change the settings, and click “Save”.
To remove the account, click “Delete”.
Note: It’s not allowed to remove an account when there’s only one account in the account list.
3.7.6 Maintenance
Note: This function is available only for “Supervisor”.
Firmware Upgrade
This function is used when users need to upgrade the camera for function scalability.
Note: Before using this function, make sure you have the correct upgrade files provided by your
installer or distributor.
Note: For system upgrade, you can only upgrade one file at a time. To upgrade all files, you need to
start from Step1 again when one file is upgraded.
Step1: Click “ ” to browse to where you save the upgrade files, and select one of them (two files in total).
Step2: Click “Upgrade” to start system upgrading. The camera will reboot after file upgrade.
Note: It takes a few minutes to finish the upgrade process. Do not disconnect the power during
firmware upgrade, or the upgrade may be failed. The camera will reboot after the upgrade.
Step3: Repeat Step1 ~ 2 again, but select the other file to upgrade this time.
System Configuration Backup
This function is used to copy your system configuration to a “System.bin” file.
You may import the same system configuration to another AVN807A, or restore your system configuration when
AVN807A is reset to default values.
Select “System.bin” in “Firmware Upgrade”, and select “Upgrade” to import the system configuration.
System Reboot
Select “Reboot” to restart your camera if needed.
Player Download
To see the event video clips downloaded to your PC, you need to first install our own video player in your PC.
Select “Free Download” to download the video player, and double click the file to install it.