Velleman CAMIP13 Quick Installation Guide - Manual (Page 16)

12
3.3.4 Color
Adjust the color performance from Brightness, Contract, Hue and Saturation. Click and drag the slider to preview
the color change on the right side of ths page and adjust the image color.
To restore the default values, click “Reset Default”.
3.4 Record Timer
3.4.1 Record
In “Record Configuration”, you can:
Enable or disable all the record functions, such as manual record, motion record and alarm record. When
“Enable” is set to “No”, all record functions are disabled even if you enable any of them in other configuration
pages.
Select if the data should be overwritten when the memory storage is full.
Select the video resolution for event recording.
Note: The higher resolution you choose, the more accuracy and higher image quality the recording will
be, but the faster the memory storage is consumed and become full.
Select the frame rate for event recording.
Note: The higher frame rate you choose, the more fluency the recording will be, but the faster the
memory storage is consumed and become full.